How to Take Care of Your Haircutting Shears in 5 Easy Steps

Take Care of Your Haircutting Shears – It is impossible for a cosmetologist to function without her reliable pair of hair cutting shears, which are also referred to as hair cutting scissors. A professional hair cutter can perform their duties effectively with the use of shears.

To someone unfamiliar with the hair care industry, shears may appear to be an unusual pair of scissors. However, shears can be quite pricey because they serve a specialized function in the grooming process. Proper maintenance is essential if you want to get a great cut and your money’s worth out of them.

How to Take Care of Your Hair-Cutting Shears

After each use, hair cutting shears should ideally be disinfected and cleaned in order to prevent the spread of disease. This is required by many states due to health and safety concerns, and it also contributes to the shears remaining in top condition so they can be used effectively. Not only should your hair cutting shears be cleaned regularly, but you should also handle them appropriately and put them away properly.

Take Caution When Working With Shears

Shears that are used for cutting hair should at all times be handled with extreme caution. Shears can be rendered unusable if they are dropped on the ground or a hard surface, as this will cause the blades to become misaligned and the cutting edge to become dull. When scissors are dropped, they can get nicked or scratched, which requires them to be maintained and repaired.

Keep your shears in a secure location and do not lend them to anyone else. Shears designed specifically for cutting hair are both expensive and purpose-built for a specific task. They need to be more usable and applicable in everyday situations. Never in your life should you attempt to cut open a bag of chips or a present with your shears.

Maintaining Clean Hair Cutting Shears

Cleaning and disinfecting the instrument on a daily basis is the first step in the maintenance process for hair cutting shears. Each and every beauty salon and barbershop has its own routines that must be followed in order to keep the shears in working order. You will almost always be required to disinfect the scissors in between using them on different patients. This is the case in the vast majority of cases.

To prevent the shears from becoming clogged with cut hair and sweat from the stylist or barber, it is recommended that they be wiped clean at regular intervals during the same haircut. This will prevent the shears from becoming clogged. Because of this, the shears won’t get clogged up with debris. Liquids of any kind, including cleaning solutions and sweat, should under no circumstances be allowed to dry on the shears. The buildup of residue gives the shears a dirty appearance, and it also has the potential to make the shears less sharp, to damage the surface of the shears, and to cause the spread of infections due to cross-contamination potentially. All of these problems can be caused by the accumulation of residue.

Before each use, the hair cutting shears should be washed with soap and water, allowed to dry completely, and then disinfected with either rubbing alcohol or a quaternium hair cutting shear sanitizer solution. After the steps of drying and cleaning that came before it, an autoclave might be used in certain circumstances.

Shears, just like any other kind of tool, need to be cleaned and sterilized on a regular basis in order to ensure that they continue to function correctly and can be used for the longest amount of time possible. Even if they aren’t going to use their shears for the next few hours, many barbers and hairstylists still lubricate them at the end of the day because they know they won’t have to. This is because they anticipate that they won’t need to. If you apply oil to your hair-cutting shears, you can prevent them from rusting and becoming stiff. This, in turn, makes getting a haircut easier to manage and more accurate.

Both the hairdressers’ and the customer’s hands will experience discomfort as a result of the dullness and rigidity of the shears, and the customer will be dissatisfied with the finished product. Another method for removing any stray hairs or debris that may have become trapped inside the scissors despite having been cleaned thoroughly is to use hair shear oil.

This oil is designed specifically for use with hair shears. While the scissors are opened to a 45-degree angle, a single drop of shear oil is applied to the joint that holds the two blades together. This is done while the scissors are in the closed position. This part of the joint is referred to as the “lock.” In order to lubricate the shears, rub some oil into them using a cloth made of a gentle material. When an excessive amount of fat is used, there is a greater chance that the shears will become slippery, which in turn increases the risk that the tool will be dropped.

Keep Your Shears in a Safe Place

After being washed, dried, disinfected, and oiled, hair cutting shears will have a longer lifespan in addition to improvements in performance and control if they are kept in a location that is dry and protected from the elements. After you have finished disinfecting and cleaning your shears, you should store them in a case that has a plush and absorbent lining.

This will ensure that your shears are shielded from wetness and the elements of the environment. You shouldn’t just toss your shears in with the rest of your tools in the case; rather, you should make sure to give them the space in the case that is allotted to them alone. If the blades of the shears come into contact with any other tools, there is a chance that they will become damaged. Place the case in an area where it is not going to be exposed to any moisture, and then store it there.

Always use properly sharpened and tensioned shears

The blades need to have a scalpel-like edge while also being well-balanced and straightforward to use. If the tension setting on a pair of hair cutting shears is not adjusted appropriately, this can have a negative impact on how the shears are handled and how well they cut the hair.

The cutting edges of the scissors will be damaged, and the user’s hand will experience increased strain, if the scissors are not tensioned tightly enough. If you use scissors with insufficient tension, your hair strands will be bent rather than cut. This happens when you use scissors to style your hair. Shears that are used for cutting hair should be taken to a professional shear sharpener or a business that specializes in sharpening shears whenever they lose their edge.

If you take your hair shears to a professional sharpener, you can be sure that they will be serviced with care and returned to you in pristine condition. If you take your hair shears to a professional sharpener, you can be sure that they will be sharpened. If you follow these instructions, you can be confident that your hair shears will remain in pristine condition.

Cut Only Your Hair with the Shears

It is common knowledge among barbers and others who have received training in hairstyling that scissors have only one use, and that use is to cut hair. However, some of their own relatives, friends, or customers may have a divergent point of view. It’s possible that a customer will ask to use your shears to open an envelope or snip a loose thread in their jumper; however, doing either of these things can damage the shears, so it’s best to decline their request.

To the untrained eye, a strand of hair, a piece of paper, and a strand of polyester all look the same. This is because untrained eyes have never had their eyes trained. On the other hand, individuals who work in the beauty industry are aware of the distinctions between the two. In stark contrast to other materials, such as fabric or paper, hair possesses a noticeably more delicate and silky texture. At the level of the molecules, hair is made up of proteins that are interconnected with one another.

The components, including wood pulp and fiber, that go into making paper are subjected to pressure during the manufacturing process. Fabric is a type of woven material that is made by weaving together twisted threads in order to create the material. Fabrics are typically made of cotton. If you use your hair shears to cut anything other than hair, the blades will become dull very quickly, and there is a chance that they will become misaligned as well.

You will be able to get more use out of your shears if you adhere to these recommendations for maintenance, and you will also be able to produce haircuts that are straightforward, accurate, and stylish.